floorex Lightning, Operation And Maintenance Manual

Page: 9 / 26

Floorex Products © Page 9
15. Always allow a 200-foot buffer saftey zone around all suface preparation
activity.
16. Always run the Lightning in a well-venitlated area, with an OSHA air
monitoring system in place at all times.
17. Read and obey all safety labels placed on the machinery at all times. If
safety labels have been destroyed or removed, call Flooring on 1800 356
673 for free replacement prior to operating the machinery.
18. The Lightning is not a toy. All operators must be over 18 years of age age
and must have read and reviewed the safety and procedures manyual
before operating the machinery.
19. The Lightning is designed for surface preparation ONLY. It is not intended
for towing, pushing or any other procedure not described in this manual.
20. Propane systems should be checked and documented twice yearly by a
certified propane proffessional for leaks and damaged parts. If a propane
leak is detected leave the machine immediately and seek assistance from
propane proffessional. Do not use or restart machinery until it is determined
safe.
21. Horseplay and or high speed cornering is not allowed with this machine and
could cause rollover resulting in injury or death.
22. No smoking or open flame is allowed while machinery is running or within
50 feet of the machine.
23. Operator must be sober and not under the influence of drugs or medication
and under full control of all bodily senses while operating this or any
machinery.
24. When transporting the Lightning, it is recommended to use a low bed tilt
trailer. This procedure insures the wheels do not leave a stable surface.
25. All Lightning operators must receive safety training before performing any
functions with the machine.
SECTION III
SAFETY and PRECAUTIONS
LIGHTNING STRIPPER