5
GENERAL SAFETY INSTRUCTIONS
IMPORTANT:
It is your responsibility to
:
Ensure that all equipment operators have access to adequate instructions
concerning safe operating and maintenance procedures
.
This product is not approved for use with
petroleum products (diesel fuel, unleaded
gasoline, jet fuel, kerosene, etc.), aromatic
hydrocarbons or other incompatible chemicals.
This product is not approved for use in
hazardous locations.
When applying power, adhere to specifications
listed in appropriate electronics manual.
Disconnect external power before attaching or
detaching input or output wires
.
Compatibility of this product’s material and the
process fluid and/or environment should be
considered prior to putting into service.
Product should never be operated outside its
published specifications for temperature or
pressure. See specifications for your model.
Make sure flow and pressure have been
eliminated from process pipe prior to installing
or removing product.
Installation near high electromagnetic fields
and high current fields is not recommended
and may result in inaccurate readings.
Do not allow water to
freeze
in
meter.
Ice
expansion may burst the plastic housing.
Do not allow this meter to be used with
steam.
Take precautions to remove sand and debris
from flow stream
. Prolonged exposure to meter
will affect meter performance and cause
irreversible damage.
Entrapped air pockets and air bubbles will
adversely affect meter performance
.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
