Flomatic Flo-Flex 745 Manual Download Page 7

 

Flomatic Corp, 15 Pruyn’s Island, Glens Falls, New York 12801 

Phone: 518-761-9797           Fax: 518-761-9798        www.flomatic.com 

745PI-BF-LS-ASC Rev. B 

October 12, 2018 

 

PARTS AND SERVICE 

Flomatic

®

 Flo-Flex

®

 Model 745 Swing Check Valve parts and service are available from your 

local Flomatic

®

 representative or the factory.  Please, make note on the front page of this O&M 

of the valve Model No, Size, Type and Working Pressure located on the valve.  Also the 
installation date and contact: 

 
 
 
 
 
 
 
 
 
 

Flomatic Corporation 

15 Pruyn’s Island Drive 

Glens Falls, NY 12801 

Phone: (518) 761-9797 or 1-800-833-2040 

Fax: (518) 761-9798 

www.flomatic.com

 

 

A Flomatic sales representative will quote prices for parts or arrange for service as needed. 

 

 

FLOMATIC

®

 LIMITED WARRANTY 

 

LIMITED ONE-YEAR WARRANTY

 (Flo-Flex

®

 Model 745 Swing Check Valves) Flomatic

®

 Corporation warrants 

that its products are free from defects in materials and workmanship.  Flomatic

®

 Corporation will replace any 

valve covered by this warranty that is found to be defective within one year, unless otherwise stated below, from 
the time of sale.  This warranty will be void if the product has been modified in any way by the purchaser, or is 
subjected to unreasonable use. 

EXCLUSION OF WARRANTIES 

Flomatic

®

 Corporation makes no warranties, expressed or implied, with respect to its valves, other than the 

expressed limited warranties described herein.  The implied warranties of merchantability and fitness for a 
particular purpose are hereby disclaimed by Flomatic

®

 Corporation.  There are no warranties that extend beyond 

the description on the face hereof. 

WARNING-NOT DESIGNED, INTENDED OR PERMITTED IN NUCLEAR FACILITY APPLICATIONS. 
FLOMATIC VALVES ARE NOT DESIGNED OR ENGINEERED FOR USE IN ANY NUCLEAR FACILITY OR IN 
CONJUNCTION WITH ANY NUCLEAR FACILITY OR SUPPORT FACILITY.  USE OF ANY OF FLOMATIC’S 
PRODUCTS IN ANY SUCH APPLICATION IS MISUSE OF THESE PRODUCTS AND VOIDS ALL 
WARRANTIES CONTAINED HEREIN, EXPRESSED AND IMPLIED, OF MERCHANTABILITY AND FITNESS 
FOR PARTICULAR PURPOSE. 

www.flomatic.com

 

1-800-833-2040 

 

Summary of Contents for Flo-Flex 745








Reviews: