Motor
Driven
Pump
Line
Cleaning
Solution
Double
Flusher
Double
Flusher
Recirculating
Line Back To
Cleaning
Solution
Cleaning
Jumper
PRODUCT WARRANTY
Flojet warrants this product to be free of defects in material and/or workmanship for
a period of one year after purchase by the customer from Flojet. During this one year
warranty period, Flojet will at its option, at no charge to the customer, repair or
replace this product, if found defective, with a new or reconditioned product, but not
to include costs of removal or installation. No product will be accepted for return
without a return material authorization number. All return goods must be shipped
with transportation charges prepaid. This is only a summary of our Limited
Warranty. For a copy of our complete warranty, please request Form No. 100-101.
RETURN PROCEDURE
Prior to returning any product to Flojet, call customer service for an authorization
number. This number must be written on the outside of the shipping package. Place
a note inside the package with an explanation for return as well as the authorization
number. Include your name, address and phone number.
PUMP / LINE CLEANING OPERATION
For operation of the pump, please see G56 Beer Pump
Installation Instructions (form #81000-303). For normal
dispensing, if a Flow Reversal Valve is added to the pump, the
set-up would be as shown in the Typical Installation Drawing.
Note that the valve is in the “Dispense Position” (see Valve
Positions Drawing).
For cleaning one line from the faucet to the keg tap:
1. Turn the valve to the “Reverse Flow” position.
2. Attach a cleaning jumper to the faucet.
3. Set FOB to bypass mode.
4. Pump the cleaning solution from the faucet to the keg tap.
5. Be sure to rinse system with cold, clean rinse water.
6. After cleaning and rinsing system, return all valves to
normal operating (Dispense) positions.
For cleaning multiple lines:
1. Attach a cleaning jumper to the first faucet.
2. Turn the valve to the “Reverse Flow” position.
3. Connect the keg tap from the first line to the keg tap of
the second line with a double flusher.
4. Leave the valve on the second pump in the "Dispense
Position.”
5. Connect the second faucet to the third faucet with a
cleaning jumper.
6. Repeat steps 2 through 5.
7. Set all FOBs to bypass mode.
8. Circulate cleaning solution through system.
9. Be sure to rinse system with cold, clean rinse water.
10.After cleaning and rinsing system, return all valves to
normal operating (Dispense) positions.
CAUTION: Do not close the system while running the
cleaning pumps. Excessive pressure build-up could
damage pumps.
LINE CLEANING DIAGRAM
4
0
/
2
0
2
8
3
-
0
0
0
1
8
N
/
P
d
e
v
r
e
s
e
R
s
t
h
g
i
R
l
l
A
.
A
.
S
.
U
n
i
d
e
t
n
ir
P
4
0
0
2
t
h
g
ir
y
p
o
C
©
UNITED KINGDOM
Flojet, Unit 1, Avant Business Centre
Denbigh West Industrial Estate
Milton Keynes, Bucks, England MK1 1DL
Tel: 44 1908 370088
Fax: 44 1908 373731
U.S.A.
Flojet
20 Icon
Foothill Ranch, CA 92610-3000
Tel: (949) 859-4945
Fax: (949) 859-1153
VALVE POSITIONS
TRIANGLES
MUST
LINE UP
Inlet From
Keg Tap
Outlet
To Keg Tap
Outlet To
FOB/Faucet
Inlet From
FOB/Faucet
TRIANGLES
MUST
LINE UP
Dispense
Position
Reverse Flow
Position
0
1.0
(3.8)
2.0
(7.6)
Flow Rate in GPM (l/min)
Pressure in PSI (Bar)
0.5
(1.9)
1.5
(5.7)
10
(0.7)
20
(1.4)
30
(2.1)
Air Inlet
Pressure
30 PSI Air Inlet
20 PSI Air Inlet
10 PSI Air Inlet
FLOW CURVE
HOSE CONNECTIONS
• All fittings are quick change.
• Secure with appropriate Oetiker Clamp for specified tubing
size or worm gear clamp 360 degree uniform clamping band.
• It is advisable to secure all hoses to prevent excessive movement.
AVAILABLE PORT FITTINGS
• Standard Fitting: 3/8”–1/2” (10mm–13mm) Barb, plastic, elbow
• Optional Fittings:
• 1/4” (6.35 mm) Barb, stainless steel, straight
• 3/8” (9.52 mm) Barb, stainless steel, straight
• 3/8” – 1/2” (10 mm – 13 mm) Barb, plastic, straight
• 1/2” (13 mm) Barb, plastic, straight
• 1/2” (13 mm) Barb, plastic, elbow
