7
INVENTORY OF SYSTEM COMPONENTS
A. Pump Module with On/Off Rocker Switch, 3.5 ft (1 m) cord.
B. Suction Wand and Hose Assembly.
C. 20 ft. (6.1 m) of 1/4 in. (6.35 mm) Discharge Tube.
D. Kit Fitting: Compresion nut and sleeve.
E. Wall power transformer.
F. Auxiliary feed tube.
MOUNTING OF SYSTEM
Select a cabinet large enough to accommodate two
(2) five gallon bottles and suction wands assemblies. Two
bottles can be maximum sixteen inches apart. Place the Pump
Module on the floor of the cabinet with on/off switch and
suction tube facing out toward the cabinet doors. Position as
close as possible to a grounded electrical outlet and place the
five gallon bottle close to the Pump Module without kinking the
suction hose.
The Bottled Water Dispensing System may also be
placed in a pantry, closet, cellar or other location
where a grounded electrical outlet is available.
Dual Inlet Bottled Water System
Installation and Maintenance Instruction Insert
(To be released in near future)
B
A
C
D
F
E
Replacement Parts for 5000 Series Bottled Water System
Model Number Description
21000738A
5000 Series BW Single Inlet Wand Kit
21000739A
5000 Series BW Dual Inlet Wand Kit
20465010
1/4” Discharge hose/tube Kit
20465035
5000 Series BW Nut & Sleeve
20465015
US Power Transformer Kit
20465020
AU Power Transformer Kit
20465025
UK Power Transformer Kit
20465030
EU Power Transformer Kit
