OPERATING INSTRUCTIONS
11
Control panel settings
Use the control panel to set the sealing temperature, film length, and air volume. Once a
roll of film is loaded and all settings are correct, press “Start” to start the production of air
cushions.
Setting the sealing temperature
The preset sealing temperature is 170°C.
To change the sealing temperature, press “SET” and enter the
required temperature. Press „ENTER“ to continue and „ESC“
to end adjustment function. The machine will start heating-up
or cooling down to required temperature. During this process
the display will show the flashing symbol
.
The progress bar display the current status of sealing
temperature like a thermometer.
Once the machine reaches the set temperature, the symbol
flashing
will change to durable and filled
.
Please have a little patience. The production can start only
when set temperature is reached. If the „START“ button has
been pressed during heating or cooling process, the machine
would be in waiting mode and would start production
independent when target temperature has been reached.
Setting the film length
The length of the air cushion strand you want to produce can
be preset in meters, as needed. This value is set to 0 by
default, which tells the machine to produce air cushions
continuously. Press three times “SET” and enter the requested
length. Press „ENTER“ to continue and „ESC“ to end the adjustment function. Press
“START” to start the production. The machine will stop automatically once the preset air
cushion strand length has been reached.
Please note: the machine will save the set length until you delete or change the length.
Setting the air volume
Set the air volume you want by pressing the buttons “+” and “-” next to the display. The
air volume can be set between 0 - 100 %. Use the recommended air volume for the
respective film types.
