SHEET 11 OF 24
STEP 2 – 24V SYSTEMS
ROUTE THE REMAINING WIRE FROM THE SOLAR PANEL (ONE WITH THE CONTROLLER FOR 24V
SYSTEMS) INTO THE GROMMET PLUG ON THE SOLAR PANEL MOUNT (FIGURE 2.4). CONNECT THE
REMAINING WIRE (RIGHT SIDE OF CONTROLLER) INTO THE HARNESS (LONG WIRE WITH RING
TERMINALS) (FIGURE 2.4 & 2.5).
FIGURE 2.5
CONNECT THE REMAINING
WIRE PLUG INTO THE
HARNESS
SOLAR PANEL
CONTROLLER
FIGURE 2.4
Summary of Contents for 511-01354-01
Page 24: ...SHEET 24 OF 24...
