5
WRAP ELECTRICAL TAPE AROUND BOTH CONNECTORS TO EACH SOLAR PANEL.
TAPE SHOULD WRAP PAST PLUGS APPROXIMATELY ONE INCH.
STEP 3
-ATTACH MAST TO UPPER MOUNT
ATTACH THE MAST TO THE UPPER MOUNT ASSEMBLY WITH (2) 3/8-16 x 1” BOLTS
AND (2) 3/8” WASHERS BY PLACING THEM THROUGH THE UPPER MOUNT HOLES
AND INTO THE RIVET NUTS IN THE MAST.
TORQUE TO 10 FT-LBS
.
