Flo FLO Home X5, Installation Manual

Page: 10 / 44

10
June 2018 | flo.com | Installation guide | FLO Home X5
To connect your new FLO Home™ X5 station to your FLO
account, you must first connect the PLC module (included).
To do this, you will need the following:
1. Internet access
2. A free Ethernet socket on your router
3. A free wall power outlet near your router
W
arNiNg
For security reason the PLC signal will only work across your
home electrical wiring. In case there are two or more electric
panels in your home, ensure the PLC and the FLO Home X5 are
on the same wiring and connected on the same electric panel,
otherwise the PLC will not connect to the network.
Do not connect the PLC module to an overvoltage
protection device (surge protector), extension cord or
power strip.
Internet Router PLC Module Electrical panel FLO Home X5
Station
Installing the PLC
10
Connect one end of the Ethernet cable (included) to
your PLC module and the other end to a free port on
your router.
11
Plug the PLC module into a wall outlet.