manualshive.com logo in svg

Flo-tech Flo-Check USB, Installation & Programming Instructions

Share
Download
Flo-tech Flo-Check USB Installation & Programming Instructions Download Page 29

Flo-Check

®

 USB Hydraulic System Analyzer

Installation & Programming Instructions

Form No. 05-SGN-PM-00191 02/12 

Page 29

Return Goods Authorization

When returning equipment for service, a Returned Goods Authorization (RGA) number must be obtained from 

our Customer Service Department. Please contact them by phone at 800-433-5263 or 262-639-6770 or by 
e-mail to [email protected].

All returns go to the following address and must include the RGA number on the outside of the box:

Flo-tech

Division of Racine Federated Inc.

8635 Washington Avenue

Racine, WI  53406-3738  USA

Attn:  RGA # xxx-xxxx

Waste Electrical and Electronic Equipment (WEEE) Directive

In the European Union, this label indicates that this product should not be disposed of with household 
waste. It should be deposited at an appropriate facility to enable recovery and recycling.

For information on how to recycle this product responsibly in your country, please visit:

www.racinefed.com/recycle/

Summary of Contents for Flo-Check USB

































Reviews:

No comments

Brands by name

Popular brands

Load more brands