CMS-120
Coolant Management System
40201194
QUICK START
INSTRUCTIONS
Flo-Dynamics, Inc. • 3300 Reedy Drive • Elkhart, IN 46514 • 800-303-5874
Page
5
of
8
FILL TANK – METHOD 1 POUR IN
Ensure there is no pressure or vacuum in the
new
coolant
tank by pulling up on the relief valve ring on top of the tank.
Remove the fill cap. Add the required amount of new
coolant and replace the fill cap.
FILL TANK - METHOD 2 VACUUM MODE
If the
Fluid Tank
gauge indicates pressure or a vacuum,
turn
Tank Control
to
VENT
to equalize tank to zero.
Close the ball valve on the
BLACK
service hose and
connect the open-end adapter.
Turn
Tank Control
and
Vacuum Control
to
Yellow.
Move the
Flow Control
to “
ON
”.
Place the open-end adapter into a new coolant container
and open the ball valve on
BLACK
hose.
When the coolant level in coolant tank reaches the desired
level, move the
Flow Control
to “
OFF
” and close the ball
valve on the
BLACK
service hose.
Move
Vacuum Control
to
OFF
and move
Tank Control
to
VENT
.
