Please read these instructions carefully. Each bike comes with an Owners’ Manual that
contains a great deal of information and tips, including a comprehensive guide to care
and maintenance that we recommend you read carefully.
Our bikes are fully adjusted and checked over at the factory. The handlebars may be
removed or assembled in the bike and turned through 90 degrees. the pedals
removed and in some cases the front wheel will have been removed too. It is a relative-
ly simple operation to re-assemble these parts, however if you do not feel competent
to do this you should ask someone who is, as it is important that these simple tasks are
done correctly for the integral safety of the bike.
Please remove all packaging very carefully, especially if using a knife or sharp blade.
Take care not to scratch any of the parts of the bike or slash the tyres.
We suggest that you keep hold of the carton in case you need to return the bike.
Getting Started
Open the carton from the top and carefully remove the bicycle. Take care not to
scratch any of the parts of the bike or cut the tyres. Remove the straps and protective
wrapping from the bicycle. Inspect the bicycle, all accessories and parts for possible
shortages.
We strongly recommend that the threads and all moving parts in the parts package be
lubricated prior to installation. Do not discard packing materials until assembly is com-
plete to ensure that no required parts are accidentally discarded.
PHASER II ASSEMBLY GUIDE
