Safety & Installation Guide
Version: 01.12
Valid from 22.10.2018
FG2P1-4S1P00/1
7
This manual
applies only on Flisom’s eFlex Series modules
3.5
Application
The Flisom eFlex modules with self-adhesive PVA 600BT backing are suitable to bond different roof
materials. The compatible roof materials are listed in the table below. All other roof materials have to
be tested before application. It is not possible to glue the eFlex modules with PVA 600BT on PVC
materials. The roofs should have a minimum slope of 2% to avoid standing water on the modules.
roof material category
type
TPO membrane
Carlisle TPO
ask supplier if primer is necessary
Firestone TPO
ask supplier if primer is necessary
GAF TPO
ask supplier if primer is necessary
Stevens TPO
ask supplier if primer is necessary
Johns-Manville TPO
ask supplier if primer is necessary
Rubber membrane
Carlisle EPDM
ask supplier if primer is necessary
Firestone EPDM
ask supplier if primer is necessary
Bitumen
Johns-Manville Granulated Mod-Bit
primer necessary
Garland Smooth Mod-Bit
primer necessary
Garland Granulated Mod-Bit
primer necessary
Garland Coated/Granulated Mod-Bit
primer necessary
Acrylic / Elastomeric
coating
Eternalastic 911 (Tropical Roof)
ask supplier if primer is necessary
Siplast PC-227
ask supplier if primer is necessary
Metal
PVDF coated steel
Galvaneal (zinc-iron alloy)
Galvalume Plus (aluminum-zinc alloy)
Aluminium
preparation work is necessary
contact Flisom for technical support
Others (PV Materials)
LPL Backsheet
PVDF film (Kynar)
Tefzel (ETFE)
Glass
FRP Backsheet (fluorpolymer)
