VUE TZ20-R User Manual
Equipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is
prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. Rev. 110.
© 2022 Teledyne FLIR LLC, Inc. Approved for public release. Teledyne FLIR Approved [FLIRGTC-SBA-007]. All rights reserved
4
FIGURE 1. VUE TZ20-R
2 INSTALLATION AND QUICK START GUIDE
Hold the securely when attaching or detaching the Vue TZ20-R.
1. Remove the protective cap from Skyport connector and insert gimbal into gimbal mount on airframe.
2. Rotate the Skyport connector to the unlocked position and completely insert into the airframe gimbal mount.
3. Rotate the Skyport connector to the locked position to secure it.
4. Confirm that the Vue TZ20-R is mounted securely.
5. If flying with a second payload, confirm both payloads are aimed forward upon start-up and initialization to
prevent payloads from contacting each other during initialization process.
6. Power on the airframe and remote controller.
7. Open the DJI Pilot Application.
8. When flying dual payloads, place the controller in Gimbal Control Mode so the two payloads turn together and
do not bump into each other during flight.
