2. View the image for the area you are inspecting.
Figure 8.2
View the test area on the VS290–00 display.
3. Short press the worklight button
to switch the light on/off if added illumi-
nation will help in your inspection work.
4. To select an image mode, press the Menu button (centre), scroll to the Im-
age Mode icon and press Menu again. Use the navigation buttons to se-
lect Thermal MSX, Thermal, or Digital camera; press Menu to confirm.
Note that the VSC-IR21 does not have an MSX or a digital camera mode.
5. The cross-hairs allow you to target and measure the temperature of a sur-
face area. The measurement is shown digitally (upper left). The thermal
scale for the current image is shown on the right edge of the display.
6. To capture an image or to stop/start a video, pull and hold the trigger.
Press the Gallery button
to view stored images and videos. Images/vid-
eos can be transported to a PC via USB.
7. The image orientation may be changed by rotating the probe. It can also
be changed by rotating the displayed image electronically (see section 7.3,
Image Rotation Menu
).
#NAS100060; r. AB/80750/80750; en-US
31
Summary of Contents for VS290-00
