18
FLIR
THERMOSIGHT PRO
U S E R M A N U A L -
Rev 1
4.8 SETTINGS MENU
The SETTINGS menu allows you to change the contrast, brightness,
video standard, compass calibration, and temperature scale settings
(in certain models), as well as to restore the settings to their factory
defaults. The Firmware (FW) revision number is listed at the bottom of
the menu display.
SETTINGS
> EXIT
RIFLE PROFILE <> 1
CAL. COMPASS
LEFT MARGIN <> 0
TOP MARGIN <> 0
LEARN REMOTE
PRE-SHOT REC <> 5
POST-SHOT REC <> 10
REC ENABLE <> OFF
FACTORY RESET
FW:
xxxxxxxxxxxx
RIFLE PROFILE
Supports 3 individual rifle profiles with individual boresight, reticle, and
palette settings.
CALIBRATE COMPASS
Select to calibrate the compass. When selected, rotate the camera in
all directions for best calibration results.
LEFT MARGIN
Shifts the screen left to right.
TOP MARGIN
Shifts the screen up and down.
LEARN REMOTE
Learns the remote channel and encryption. Select this to pair a new
remote with the camera. When pushed, the phrase PUSH ANY REMOTE
KEY will appear. Push any button on the remote. When calibration is
successful, the phrase LEARN SUCCESSFUL will appear.
PRE-SHOT REC
Number of pre-recorded seconds in buffer to write to video file
recorded by shot activation.
POST-SHOT REC
Number of post recorded seconds of video written to file recorded by
shot activation.
REC ENABLE
Turns on shot activation video recording.
NOTE:
Training shot counter must be done prior to enabling shot
activated recording.
FACTORY RESET
Resets the camera to factory defaults.
FW:
Displays the System software version and the thermal camera software
version.