Configuration
CB-640x Installation and User Guide Revision 100
February 2021
68
This document does not contain any export-controlled information.
screen affects whether the TLS port (443) and the Web port
(80) are enabled or disabled:
Enable SSL
Setting
TLS
HTTP
On
On
On or Off
Off
(default)
Off
On
HTTPS Only
On
Off
Also, to ensure communication with the camera, the ONVIF and RTSP ports cannot be disabled.
5.14.6
IP Filter
You can restrict access to the camera by either allowing or denying up to 10 specific IP addresses.
Figure 84: IP Filter Settings
To allow access for one or more specific IP addresses:
1. For
Mode
, select
Allow
.
2. Move the
Enable
slider to the right for each IP address for which you are allowing access.
3. Specify the
IP Address
.
4. Click
Save
.
To deny access for one or more specific IP addresses:
1. For
Mode
, select
Deny
.
2. Move the
Enable
slider to the right for each IP address for which you are denying access.
3. Specify the
IP Address
.
4. Click
Save
.
The default IP filter
Mode
is OFF.
5.15 Firmware & Info Page
On the Firmware & Info page, you can:
•
Specify a unique name for the camera.
