FLIR gS125 inverted, Installation Instructions Manual

Page: 50 / 102

4.22 HDMI video output
If your MFD has a HDMI output connection the
MFD ’s screen can be output to an external display.
Refer to the Connection Overview section to
establish if your MFD has a HDMI output.
D12916-2
3
2
1
1. MFD
2. External display (See note below)
3. Raymarine 5 m (16.4 ft) HDMI video output cable
(A80219)
Note:
1. The external display you are connecting to
must support the 720p standard to enable you
to view the multifunction display screen on the
external display. The multifunction display’s
video output resolution is fixed at 720p.
2. The HDMI cable must only be connected to an
external display that is electrically isolated from
the vessel’s dc power supply (i.e the screen
and the 0V of the external display’s HDMI
connector must not have a direct connection
to the vessel’s dc power supply).
For further assistance please contact Raymarine
technical support.
4.23 IP Camera connection
Raymarine ® IP cameras can be connected
directly to the display’s network connection or can
be connected to the
SeaTalk hs network, via a
Raymarine ® network switch.
The network connection transmits the video signal to
a compatible
Raymarine ® MFD .
IP camera direct connection
D12592-5
3
4
2 1
1. MFD
2. CAM200IP
3. RayNet to RJ45 SeaTalk hs adaptor cable
4. Ethernet coupler (R32142)
IP camera network connection
D12593-5
4
3
2
5
5
5
5
3 3
3
4
4
4
1
1. MFD
2. Raymarine ® network switch
3. RayNet to RJ45 SeaTalk hs adaptor cable
4. Ethernet coupler (R32142)
5. CAM200IP
Important: If your IP camera(s) are not detected
by your multifunction display, try power cycling
the IP camera(s) whilst leaving your multifunction
display powered up.
50
gS Series installation instructions