FLIR gS125 inverted, Installation Instructions Manual

Page: 35 / 102

4.2 gS95 / gS125 / gS165 Connections
overview
Details of the connections available on the
multifunction display are shown below.
D12700-1
1 2 4 5 6 3
1 SeaTalk ng
2 HDMI
3 3 x PoE / RayNet SeaTalk hs
4 Card reader
5
Video in / Alarm Out
6 Power / NMEA 0183 / Video in
4.3 gS195 connections overview
Details of the connections available on the gS195
are shown below.
D13044-3
7 8
1 2 3 4 5 6
1 SeaTalk ng connection
2 HDMI Output
3 PoE / RayNet SeaTalk hs connection
4 Card reader connection
5 Analogue video Input / Alarm Output
6 Power / NMEA 0183 / Analogue video Input
7
HD-SDI Video Input
8 PoE / RayNet SeaTalk hs connection
Connector and cable protective caps
Unused connectors and disconnected cables should
be adequately protected against damage.
Important:
The rear connectors on your product are fitted with
protective caps which should be securely fitted
over any connectors that are not going to be used
/ connected.
If any cables are to be left disconnected then,
if available use the cables protective cap or
insulation tape to protect the cable connector.
Cables and connections 35