MA410 V2.2 08/08
11
Support line (781) 890-7440
Technical support: Extension 200; E-mail: [email protected]
Repair & Returns: Extension 210; E-mail: [email protected]
Product specifications subject to change without notice
For the latest version of this User’s Guide, Software updates, and other
up-to-the-minute product information, visit our website: www.extech.com
General Specifications
Clamp jaw opening
1.18" (30mm) approx.
Display
4,000 count LCD
Continuity check
Threshold <150
Ω
; Test current < 0.5mA
Diode test
Test current of 0.3mA typical;
Open circuit voltage
[
1.5VDC typical
Low Battery indication
Battery symbol is displayed
Over-range indication
‘OL’
display
Measurement rate
2 readings per second, nominal
Thermocouple sensor
Type K thermocouple required
Input Impedance
10M
Ω
(VDC and VAC)
AC bandwidth
50 to 400Hz (VAC)
AC response
Average responding
Operating Temperature
41
°
F to 104
°
F (5
°
C to 40
°
C)
Storage Temperature
-4
°
F to 140
°
F (-20
°
C to 60
°
C)
Operating Humidity
Max 80% up to 87
°
F (31
°
C) decreasing linearly to 50% at
104
°
F(40
°
C)
Storage Humidity
<80%
Operating Altitude
7000ft. (2000meters) maximum.
Battery
Two “AAA” 1.5V batteries
Auto power OFF
After approx. 30 minutes
Dimensions & Weight
7.9x2.6x1.5” (200x66x37mm); 7.23oz. (205g)
Safety
For indoor use and in accordance with the requirements for
double insulation to IEC1010-1 (2001): EN61010-1 (2001)
Overvoltage Category III 600V, Pollution Degree 2.
Approvals
CE,
Copyright
©
2008 Extech Instruments Corporation (a FLIR company)
All rights reserved including the right of reproduction in whole or in part in any form.
