This document does not contain any export-controlled information.
Configuration
49
427-0300-00-12 - Revision 110 - May 2021
Changing these settings does not immediately take effect. To apply a change to these settings, click
Save
and then reboot the camera.
4.7.3
TLS/HTTPS
Enable or disable camera control using Transport Layer Security (TLS)/secure HTTP (HTTPS).
Enable or disable HTTPS redirect.
Changes to these settings do not immediately take effect. To apply the changes, click
Save
and then
reboot the camera.
4.7.4
Services
Enable or disable digest authentication for the FLIR CGI control interface. The default setting is
On
(enabled).
Firewall Settings
For enhanced security, the camera has a firewall that you can enable by clicking
On
. By default, when
you enable the firewall, the following services are set to
Allow
, which means they remain enabled and
their default ports remain open:
·
RTSP
·
UPNP
·
Nexus Discovery
·
Nexus SDK
·
ICMP
To disable a service and its default port, click
Block
.
Caution
Disabling services and ports can affect product functionality.
