FLIR E-EST Series, User Manual

Page: 79 / 87

Camera settings
15
The Settings menu includes the following:
• Recording mode .
• Connections .
• Camera temperature range .
• Save options & storage .
• Device settings .
15.1 Recording mode
The Recording mode is used to select:
• Single shot : This setting enables single shot mode. In this mode, you save an image
by pulling the trigger.
• Video : This setting enables video recording mode.
• Time-lapse : This setting enables time-lapse mode.
• Screening : This setting enables screening mode.
• Screening settings (Applicable to Auto and Button mode): The screening algorithm
only evaluates temperatures between the Max skin temperature and Min skin temper-
ature settings. It is recommended to use the default values (min 32.5°C (90.5°F), max
41.5°C (106.7°F)).
15.2 Connections
• Wi-Fi : This setting defines Wi-Fi networks. For more information, see section 7.9 Con-
figuring Wi-Fi .
• Bluetooth : This setting defines Bluetooth connectivity. For more information, see sec-
tion 7.10 Pairing Bluetooth devices .
15.3 Camera temperature range
The Camera temperature range menu displays the temperature range of the camera.
The unit ( ℃ or ℉ ) depends on the temperature unit setting, see section 15.5 Device
settings .
15.4 Save options & storage
• Preview image before saving : This setting defines if a preview image will be displayed
before the image is saved.
• Add annotation after saving : This setting defines if an annotation tool will be displayed
when the image has been saved. Available options are:
◦ Save : No annotation tool will be displayed.
◦ Save & add note : The note annotation tool will be displayed.
◦ Save & add table : The table annotation tool will be displayed.
◦ Save & add voice annotation : The voice annotation tool will be displayed.
◦ Save & add sketch : The sketch annotation tool will be displayed.
◦ Save & add any annotation : The annotation tool menu will be displayed.
• Image resolution
3
: This setting defines the resolution of the images captured by the
camera. Available options are Normal and UltraMax . For more information, see sec-
tion 14.4.3 UltraMax .
• Video compression : This setting defines the storage format for video clips. Available
options are:
◦ Mpeg (*.mpeg) : MPEG recordings cannot be edited after the file has been saved.
◦ Radiometric storage (*.csq) 4 : A CSQ file supports full radiometry but is only sup-
ported by FLIR Systems software. The file does not include any visual image infor-
mation. With this setting, only
Thermal image mode is supported when recording
video.
#T810583; r. AA/75420/75423; en-US 73
3. This item is dependent on the camera model.
4. This item is dependent on the camera model.