1. LED indicator showing that the memory card is busy.
Note
• Do not eject the memory card when this LED is flashing.
• Do not connect the camera to a computer when this LED is flashing.
2. SD memory card.
3. USB-C cable.
7.9
Configuring Wi-Fi
Depending on your camera configuration, you can connect the camera to a wireless local
area network (WLAN) using Wi-Fi, or set up the camera as a wireless access point.
7.9.1
Connecting the camera to a WLAN
1. Select
(
Settings
) >
Connections
>
Wi-Fi
>
Connect to network
.
2. Select
Available networks
. This displays a list of the available networks.
3. Select one of the available networks and push the navigation pad.
Note
Password-protected networks are indicated with a padlock icon, and for these
you will need to enter a password the first time you connect to the network. After that
the camera will connect automatically to the network. To disable the automatic con-
nection, select
Forget network
.
Note
Some networks do not broadcast their existence. They appear in the list as
Unti-
tled
. To connect to such a network, you will be prompted to enter additional parameters.
7.9.2
Setting up a wireless access point
1. Select
(
Settings
) >
Connections
>
Wi-Fi
>
Share
.
2. (Optional step.) To display and change the parameters, select
Share settings
.
• To change the SSID, select
Network name (SSID)
.
• To change the WPA2 password, select
Password
.
Note
These parameters are set for your camera’s network. They will be used by the
external device to connect that device to the network.
7.10
Pairing Bluetooth devices
You can use the camera with a Bluetooth-enabled headset.
Before you can use a Bluetooth device with the camera, you need to pair the devices.
Follow this procedure:
1. Select
(
Settings
) >
Connections
>
Bluetooth
.
2. If the
Bluetooth
check box is unchecked, push the navigation pad to enable
Bluetooth.
Note
You also need to ensure that the external Bluetooth device is in visible mode.
3. Select
Available devices
.
4. Wait until a list of available devices is displayed. This will take about 15 seconds.
5. When a Bluetooth device is found, select the device to add it, and begin the pairing
procedure. The device is then ready to be used.
#T810583; r. AA/75420/75423; en-US
22
