- 30 -
Digital Video Security Systems
•
MOTION:
You can set motion detection to highlight specific areas of the
screen when motion is detected. Press
Left/Right
to select
ON
to enable
motion detection or
OFF
to disable. If you select
ON
, press
Set Up
to
configure the following parameters:
MOTION
AREA
AREA DISPLAY
VALUE
MOTION VIEW
RETURN
1
ON
80
OFF
RET
IIIIIIIIIIIIIIII IIII
|
»
Area:
Press
Left/Right
to select areas
1~4
.
»
Area Display:
Press
Left/Right
to select
ON
to enable the selected
area or select
OFF
to disable the selected area. To configure the area:
a. If
ON
is selected, press
Set Up
.
b. Press
Left/Right/Up/Down
to configure the position of the
motion area and then press
Set Up
to confirm.
c. Press
Left/Right/Up/Down
to configure the size of the motion
area and then press
Set Up
to confirm.
d. Press
Set Up
again to save changes.
»
Value (Sensitivity):
Press
Left/Right
to adjust the sensitivity of
the motion detection. The higher the setting “Value” is, the higher the
sensitivity for motion.
»
Motion View:
Press
Left/Right
to select
ON
to show highlights on
the monitor when the camera detects motion in the motion areas.
•
Privacy:
This allows you to hide up to 8 privacy areas on the monitor.
Areas
designated as privacy areas will not be recorded.
Press
Left/
Right
to select
ON
to enable privacy areas or
OFF
to disable. If
ON
is
selected, press
Set Up
to configure the following:
TIP
•
Motion detection settings are generally set separately on the DVR, where
they can trigger motion recording or other actions.
