- 9 -
Digital Video Security Systems
Flush Mount
1. Cut a hole in the ceiling using the inside line of the included flush mounting
template. Drill holes as marked on the template.
Camera
Termination
Cable
Camera
Cable
Tapping Screw
4x25 (3x)
Camera
Module
Dome Cover
Cut along
inside line
Drill mounting
holes
Flush Mounting Template
Go to “Adjusting the Camera” on page 11.
2. Run the extension cables through the ceiling
and connect the camera termination cable
to the extension cable.
3. Connect the camera cable to the camera
termination cable inside the ceiling.
4. Use the included allen key to loosen the
dome cover screws (3x) and then remove
the dome cover.
5. Attach the camera module to the ceiling
using the tapping screw 4x25 (3x).
