FLIR 72501-0101, User Manual

Page: 119 / 146

Changing settings
28
28.1 General
You can change a variety of settings in the camera. You do this on the Settings menu.
The Settings menu includes the following:
• Connections .
• Camera temperature range .
• Save options & storage .
• Device settings .
28.1.1 Connections
• Wi-Fi : This setting defines Wi-Fi networks. For more information, see section 26 Con-
figuring Wi-Fi , page 102.
• Bluetooth : This setting defines Bluetooth connectivity. For more information, see sec-
tion 25 Pairing Bluetooth devices , page 101.
28.1.2 Camera temperature range
For accurate temperature measurements, you must change the Camera temperature
range setting to suit the expected temperature of the object you are inspecting.
Available temperature range options are dependent on the camera model. The unit ( ℃
or ℉ ) depends on the temperature unit setting, see section 28.1.4 Device settings , page
106.
28.1.3 Save options & storage
• Save button half-press : This setting defines the function of the Save button. Available
options are:
◦ Autofocus : Pushing the Save button half-way down will autofocus the infrared
camera.
◦ None : Pushing the Save button half-way down will have no effect. With this setting,
you may want to assign the autofocus function to one of the programmable buttons.
• Inspection route 4 : This setting is used to activate and configure the Inspection Route
function. For more information, see section 23 Inspection Route , page 91.
• Preview image before saving : This setting defines if a preview image will be displayed
before the image is saved.
• Add annotation after saving : This setting defines if an annotation tool will be displayed
when the image has been saved. Available options are:
◦ Save : No annotation tool will be displayed.
◦ Save & add note : The note annotation tool will be displayed.
◦ Save & add table : The table annotation tool will be displayed.
#T559954; r. AT/65353/65353; en-US 105
4. This item is available with the FLIR Inspection Route camera software option.