Flightcell
®
DZM3
Quick Start Guide
www.flightcell.com
(Version 1.0, Released 26/04/11, Change Note FCN0185)
Page
2
Using position reports and alerts
To send a manual position report (Point of Interest):
Press MARK to send
current GPS position.
To send a Distress report:
Press and hold EMER for 1.5 seconds. When the
DZM3 display flashes “Distress Mode”, distress reports are sent at pre-programmed
intervals.
To cancel Distress reports:
Press and hold EMER for 1.5 seconds until the
display ceases flashing.
Using AFF/ARM
Automated Flight Following (AFF)/Automated Rescue Monitoring (ARM) is a service
that monitors your aircraft’s flight and raises an alarm if position reports are
overdue.
To activate and deactivate AFF/ARM:
To activate, press AFF, the display shows “AFF Requesting”. The display will
show “AFF Active” when the tracking server has begun monitoring your
aircraft.
To deactivate, press AFF; when the tracking server finishes monitoring your
aircraft, the display shows “AFF Terminated”.
Reading an incoming text message
The DZM3 display flashes and announces that a message has been received.
To read an incoming message:
Press CONNECT.
Use the UP and DOWN arrow keys to scroll though the message.
To read a stored message:
Press the MESSAGE key.
Use the UP and DOWN arrow keys to scroll to the required message.
Press ENTER to open the selected message.
To exit the message screen:
Press END.
Isolating (muting) a phone call
Isolation prevents audio to and from the phone (for example, when it is necessary
to communicate on the aircraft radio).
To isolate a phone call:
Press and hold ISO until the display shows “Phone
Isolated”.
To cancel isolation:
Press and hold ISO until the display no longer shows “Phone
Isolated”.
