3
Important Precautions
To reduce the risk of serious injury or damage to the flight motion
simulator, please read the following important precautions before using your
Dreamflyer motion simulator.
Read all instructions in this manual before using the flight motion simulator.
Great care must be taken when climbing on to or off of the flight motion simulator.
The machine can and may move at any time in any direction causing a fall or
possible injury.
Do not stand on rudder pedals when mounting the flight motion simulator. Remove feet
from rudder pedals before trying to shift your weight or stand up.
It is the responsibility of the original owner to ensure that all users of the flight motion
simulator are adequately informed of all precautions.
Place the flight motion simulator on a level surface.
Keep the simulator indoors and away from moisture and dust.
Inspect and properly tighten all parts on a regular basis. Replace any worn parts
immediately.
Keep children under 4 and pets away from the flight motion simulator at ALL times.
Ensure children under 18 are supervised at ALL times when using or around the flight
motion simulator.
The flight motion simulator should not be used by persons weighing more than 250 Lbs,
by pregnant women or people using medications...
If you feel dizziness or illness while using the flight motion simulator, stop immediately and
contact your physician.
Do not lean on the flight motion simulator at any time as it may move causing a fall or
injury.
Ensure that the main monitor is attached using ONLY the screws provided by Flight
Motion Simulators Inc. These screws are slightly longer and will ensure a safe mounting of
the monitor.
Please ensure that any person using your flight motion simulator is aware of all the
precautions on this page.
Summary of Contents for Dreamflyer FMS df X-2
