17
11)
Once the left and right assemblies are together they can be joined together by the Hanger
Brace. See below. Once again leave the fasteners loose so that the holes on the seat can be
aligned with the holes on the mating assembly. Thread four nuts onto the four eyehooks
and screw into the assembly as shown. Tighten the four nuts against the assembly to lock
the eyehooks in position.
Summary of Contents for Dreamflyer FMS df X-2
