Install the servo arm to the servo
after making sure the elevator is
level with the stab with the servo
is in dead center.Tape the
elevator in place using blue
painter's masking tape.
Install the aileron horns in place
with AB glue.Align the holes in the
horns .Install the servo after
pulling the servo extention wire
in the wing.Install the servo arm
on the servo and loctitle it in place
on the mount screw.Install the
pushrod and control horn.
●
Check for movement and cente
on the servo for the aileron to be
in a level resting position.
●
Check to make sure you have
the servos in a reverse manner
so ailerons with work properly.
MAIN WINGS
AB
Bolt on tabs for
stabs
Page5
