Mount the elevator servo in place
and pull the servo wire extension
up toward the front.
Attach the servo extension wire
using foam wire holding brackes
or zip ties to the formers along
the sides of the fuse so they
can't interfere with the rudder
control cables.
Mount the servo arm on to the
elevator push rod before installing
it on the servo so you can tighten
the nylon insert locking nut to the
mounting screw.
Slide the stab on to the alumium
tube and attach to fuse using the
bolts provided.
●
Make sure the bolts has been
totally screwed into the blind nuts.
Page4
