Mount the servo arm on to the
elevator push rod before installing
it on the servo so you can tighten
the nylon insert locking nut to the
mounting screw.
Slide the stab on to the alumium
tube and attach to fuse using the
bolts provided.
●
Make sure the bolts has been
totally screwed into the blind nuts.
Install the servo arm to the servo
after making sure the elevator is
level with the stab with the servo
is in dead center.Tape the
elevator in place using blue
painter's masking tape.
Bolt on tabs for
stabs
P.4
Summary of Contents for EXTRA-330SC 60CC
