The value will increase by 5mm each time switch “A” is pressed.
The value will change rapidly when switch “A” is pressed continuously.
Once the desired value is displayed, press switch “B” for 2 seconds or more
to set.
In the case of tires which have circumference of less than 2050mm, press
switch “A” continuously. After the value increases to 2400, it will change
to 1300.
Continue pressing switch “A” until the desired value is reached, and then
press switch “B” 2 seconds or more to set.
The tire size display can appear as any one of the following 18 displays, in
addition to 26 x 1.75 (2050mm)
The display will appear as shown in fig9, Enter the value which was
measured previously.
Check whether the
cassette has 7, 8, 9,
or 10 sprockets.
[
]
Example
12,13,14,15,16,17,18,19,21,23
• • • •
10 sprocket
12,13,14,15,16,17,19,21,23
• • • • • • •
9 sprocket
Example
2050
• • •
Tire circumference (mm)
26 1.75
• • •
Indicates the tire size
for 26inch x 1.75
Tires with sizes other that these are not displayed
Check whether the front chainwheel is a
single, double or triple chainwheel.
48x38x28
• • • • • •
Triple
53x39
• • • • • •
Double
53
• • • • • •
Single
Fig.9
* If the tire circumference matches one of
those in this list, the tire size is displayed
alternately.
ETRTO
Main Display
Sub Display
ETRTO
Main Display
Sub Display
23-571
32-584
40-559
47-559
18-622
50-559
37-590
47-559
54-559
19-622
54-559
1970
2005
2030
2050
2070
2070
2075
2075
2085
2090
2090
26 1.00
26 1.40
26 1.50
26 1.75
700 18
26 1.90
26 1-3/8
26 1.95
26 2.00
700 19
26 2.10
57-559
40-584
54-571
20-622
23-622
25-622
28-622
57-559
2095
2100
2100
2100
2105
2115
2135
2260
26 2.20
26 1-1/2
26 2.35
700 20
700 23
700 25
700 28
26 2-1/8
[
]
Example
2028 - 2032mm
• • • • • •
2030mm
2033 - 2037mm
• • • • • •
2035mm
2038 - 2042mm
• • • • • •
2040mm
Roll forward
Wheel circumference
(1) Selecting Km or Miles
When switch “AC” (All Clear) is pressed, the
display as shown in fig6 appears and the k/h
setting starts flashing. Select your choice for
Km/h or Mile/h by pressing switch “A”.
Once your choice is displayed, press switch “B”
continuously for 2 seconds or more to set.
Fig.6
Fig.8
Fig.7
(3) Entering the tire circumference
The display will change as shown in Fig. 8.
Press switch “A” to display the bicycle
number that you would like to change, and
press switch “B” for 2 seconds or more.
Because of the preset chainring and sprocket
tooth configurations used, bicycle numbers 1
and 2 are recommended for road bicycles
and bicycle numbers 3 and 4 are
recommended for MTB bicycles.
(2) Entering odometer data
The display will change as shown in Fig. 7.
For each column, press switch “A” so that a
numeral is displayed, and then press switch “B”
to accept the setting. After entering the single
decimal place numeral, press switch “B” for 2
seconds or more.
If not entering odometer data, press switch “B”
for 2 seconds or more when the display
appears as shown in Fig. 7.
Switch “A”:
Select
Switch “B”:
Accept
All clear
(AC) switch
Switch “A”:
Change
value
Switch “B”:
Accept
Switch “A”:
Change
bicycle
number
Switch “B”:
Accept
Switch “A”:
Change
value
Switch “B”:
Accept
