Wiring Diagram Hook Up Procedure:
1) Connect the power harness to the mating connector on the video pod.
2) Connect the power harness to vehicle’s electrical system by tapping into an accessory hot
line.
3) Verify all functions of the system before final mounting of the finished assembly.
Green
(Right+)
Black
(Ground)
Gray
(Left+)
Stereo Headphone
Jack
Stereo Headphone
Jack
Spade
Terminals
Spade
Terminals
Spade
Terminals
Optional Remote
Headphone
Stations
TV antenna
(If applicable)
Antenna
Black: Ground
Red: +12 VDC
(Accessory Cir.)
Power Harness
Item C1
Antenna
Connector
Power
Connector
(2-pin)
Right Out
(Red)
Left Out
(White)
5
FM Modulator and
wireless
headphones could
be connected with
two dual RCA
patch cords,
connected to L and
R output jacks
shown above.