USER MANUAL
1000W LED
USER MANUAL
1000W LED
4
7
●
Set the knob to EXT.
(2) Identify the lock receivers on the underside of the power supply
enclosure. Attach the locking receiver to the nail on the wall.
Connect the M19 male adaptor on the LED fixture to the M19 female
outlet on the extension cord, then connect the extension cord’s the
M19 male connector to the appropriate female outlet on the power
supply.
(3) Loop the waterfall mounts on the wire deck or cross bar. Slightly separate
the mounting hardware until the hooks slide into the holes on the side of the
power supply enclosure.
As mentioned in the previous steps, simply connect the male end of the LED
fixture to the extension cord, then attach the extension cord to the power
supply enclousure.
●
Remove the dummy from the input port on the first LED fixture.
Note: Keep the dummy in a safe place!
The dummy is necessary
to operate the LED fixture in standalone mode.
6.5 CONNECTING UP TO 160 LED FIXTURES
EXT/OFF
100%
80%
60%
50%
40%
What
’
s Included: Solid decking mounts.
We suggest hanging the LED fixture from cross bars in a rack system that has solid support guaranteed not to
collapse under weight.
To create proper balance, be sure to position the LED fixture parallel to the length of the rack while you
’
re
setting up.
●
Using the solid decking mounts, loop each mount across the crossbar above the LED light bar second
from the end of either side of the fixture. Use two decking mounts on either end.
Note:
Do not attach mounting hardware to the end light bars. You risk damaging the fixture if you do.
●
Once all four decking mounts are in place, use two people to lift up the LED fixture and mount it on the
decking mounts. You can do this by delicately prying apart the hooks until there is enough room to slide
the fixture between. Release the decking mounts and they will hook around the fixture.
6.2 MOUNTING WITH SOLID DECKING MOUNTS
Warning!
Be sure to mount the system to something that can hold the weight of the LED fixture.
Note:
Take caution if you touch the LED bars. Ensure the LED array does not come in contact with sharp objects
or force that may damage the diodes and be sure to wait at least 30 minutes for the LED strips to cool down
before touching the LED strips with your hand as they will be hot!
We will ship the LED fixtures with your choice of hanging hardware. In order to mount your LED fixture
properly, start by identifying a suitable support structure you can mount your fixture on. Common support
structures include pallet racks, trusses, structural channels, Unistrut, and rolling tables. For optimal results,
we recommend that two people mount this fixture together.
6.1 INSTALLATION PREPARATIONS
