FLEX-6000 QUICK START GUIDE, VER. 2.0, 4/14
|
9
Software Defined Radios
FlexRadio Systems
®
3.0
GETTING TO KNOW YOUR FLEX-6000
SIGNATURE SERIES RADIO
3.0 GETTING TO KNOW YOUR FLEX-6000 SIGNATURE SERIES RADIO
Below is a description of the FLEX-6300 front and rear panel
controls and connectors.
FLEX-6300 Front Panel
1
Power Button with colored LED status indicator
2
Microphone: 8-pin Foster, female
3
Stereo Headphone: 1/4" (0.64cm) TRS phono connector
4
CW Key / Paddle: 1/4" (0.64cm) TRS phono connector
FLEX-6300 Rear Panel
1 & 2
Transceiver Antenna Ports #1 and #2: SO-239
3
Chassis Ground: #8 Thumb screw
4
Low Level Transverter RF input/output: BNC connector
5
Twisted Pair Ethernet port: RJ-45 - 100/1000 Twisted Pair
6
DC Power Input: Anderson Power Poles - 25 [email protected]
7
Remote Power On: RCA Connector
8
TX Relay Driver Output: RCA Connector
9
Accessory Connector: DB-15HD - see pin out in FLEX-6000
Hardware manual