FlexLink X85, Maintenance Manual, Page: 9 / 48

Safety
Create
d
by EBCCW
0
0
:06
3
5814EN-3
2 Safety
The machine has been designed in such a way, that it can be used and
maintained in a safe way. This holds for the application, the circumstances
and the instructions described in this manual. Any person working with or
around this machine should study the manual and follow the instructions.
It is the responsibility of the employer to make sure that the employee is
familiar with, and follows, these instructions.
The company or the country in which the machine is used may require ex-
tra safety measures. This particularly applies to the working conditions.
This manual does not describe how these are to be complied with. In case
of doubt, consult your government or safety officer!
2.1 System information
The order number and/or general drawing number shall always be speci-
fied when communicating with FlexLink with respect to the machine.
2.2 Important safety conditions
Before the machine shall be operated by a user, the following safety con-
ditions must be met:
Make sure that children or animals have no access to the machine and its
surrounding areas by, for example, screening off the machine with a fence.
Only personnel who have read and understood the operating instructions
are allowed to operate, maintain and clean the machine.
Do not reach into the machine while it is running or on. Even if the machine
is not running, it can be ‘on’, which means start operating automatically.
Safety provisions, such as side guards, bottom guards, emergency stops
and detectors shall not be removed or deactivated while the machine is
running.
Provide good ambient lighting to enable the operator to work well and or-
derly with the machine.
2.2.1 General
• Incorrect use of the equipment can cause personal injury.
• Do not stand or climb on the equipment.