FlexLink X85, Maintenance Manual, Page: 14 / 48

Maintenance
8
5814EN-3
3.2 Maintenance instructions
3.2.1 Introduction
This maintenance manual contains directions for the standard components
sold through the X85 chapter of the FlexLink main catalogue. For non-Flex-
Link components, such as motors, pneumatic equipment, control systems
etc., the manufacturer’s maintenance instructions apply. In general, main-
tenance instructions are not given for equipment which the customer has
chosen and specified for fitting to the installation.
The instructions supplied should be followed to ensure that the installation
runs with a high degree of safety and to minimize the risk of breakdowns
which can adversely affect the production.
The installation must be used for the transport of goods in accordance with
the system specifications or within design criteria as outlined in the gener-
al catalogue. If a fault occurs on the installation which cannot be rectified
with the help of the instructions in the manual, or if unexpected conditions
occur during servicing, contact your FlexLink retailer or FlexLink mainte-
nance personnel.
3.2.2 Warranty/guarantee
FlexLink conveyors are covered by warranty/guarantees as identified with-
in the trading terms issued for each country. Check the warranty conditions
for your system before submitting claims etc. If you are in any doubt as to
what warranty is applicable to your system, consult your supplying agent
or FlexLink direct.
3.2.3 Spare/replacement parts
If there is a demand for spare parts, contact FlexLink or your supplying
agent.
3.2.4 Checklist/maintenance schedule
A suggested maintenance schedule is shown on page 27.
3.2.5 Important
Consult your system documentation for any special maintenance required
for your specific installation.