webdyn.com
V2.0 subject to changes | Webdyn © by Flexitron Group
7
2. About this Document
This guide describes all features of the WebdynEasy W M-Bus product.
Its purpose is to help operators install and configure their WebdynEasy W M-Bus and to allow operating
entities to include the collected data in their IS.
This manual is split into six separate sections:
• Section 1: General presentation
• Section 2: Installation
•
Section 3: Configuration
• Section 4: Operation
• Section 5: Tools & diagnostics
•
Section 6: FAQ
2.1 Scope
This technical description is valid for WebdynEasy W M-Bus hubs from hardware version V1 and software
version V1.0 onwards.
2.2 Target Audience
This guide is for on-site installers who will cable and configure the installations, for those in charge of
local or remote maintenance of the installations, and for developers of portals to use the sent data.
2.3 Product Versions
VERSION
CONTENT
V1.0
Creation.
V1.1
Modification of the functioning of the product regards the magnet and the
number of bips. Adding of a scheme concerning file management.
V1.2
Addition and Modification on the supervision part. Adding autonomy.
V1.3
Additions in the glossary, modification of the command file.
V1.4
Additions on Field L for B format frames.
V1.5
Details on the data parameter F and on the diagnostic mode, adjustment of
the/scheduleRadio/data range.
