18
MTX-Java-T | 2019/2
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT:
SALES:
mtxm2m.com
GSM/GPRS/LTE
IDLE
Power saving disabled or an USB connection not
suspended, but no call in progress.
GSM TALK/GSM
DATA
Connection between two subscribers is in progress.
Power consumption depends on the GSM network
coverage and several connection settings (e.g. DTX
off/on, FR/EFR/HR, hopping sequences and antenna
connection). The following applies when power is to
be measured in TALK_GSM mode: DTX off, FR and no
frequency hopping.
GPRS DATA
GPRS data transfer in progress. Power consumption
depends on network settings (e.g. power control level),
uplink / downlink data rates and GPRS configuration
(e.g. used multislot settings).
EGPRS DATA
EGPRS data transfer in progress. Power consumption
depends on network settings (e.g. power control level),
uplink / downlink data rates and EGPRS configuration
(e.g. used multislot settings).
LTE DATA
LTE data transfer in progress. Power consumption
depends on network settings (e.g. TPC Pattern) and data
transfer rate.
Power Down
Normal shutdown after sending the power down command. Only a voltage
regulator is active for powering the RTC. Software is not active. Interfaces are not
accessible. Operating voltage remains applied.
Airplane
mode
Airplane mode shuts down the radio part of the module, causes the module to
log off from the network and disables all AT commands whose execution requires
a radio connection. Airplane mode can be controlled by AT command.
