8
The attached wall bracket, as well as the enclosed bracket,
are used for wall mounting. The same mounting is used
whether the unit is installed with ducts up or out to the side
(see Fig. 5). As standard, the unit has the mounting bracket
mounted on the top. In case of sideways mounting, the rear
wall of the unit must be dismounted, and then remounted
after the mounting bracket has been moved (se Fig. 5).
• The wall bracket (Fig. 6) is screwed to the wall using the
enclosed screws.
• The unit is suspended from the rail (Fig. 7). Hold the unit
at an angle when hooking it onto the wall.
The upper edge of the wall bracket should be mounted
65 mm higher than the top of the unit. If one desires, for
example, that the top of the unit shall be 400 mm under
the ceiling, the wall bracket should be mounted 335 mm
from the ceiling, measured from the ceiling and down to the
upper edge of the wall bracket. In the case of sideways wall
mounting, the rear wall must be detached before moving the
brackets (see Fig. 5).
UNI 4 Installation Instructions
horizontal installation
sideways installation
Fig. 6
Fig. 7
CEILING
Fig. 5
CAUTION! Due to the size and weight of the
unit, two persons must take part in the wall
mounting of the unit.
!
335 mm
