3
1 Introduction
The SP405 an interleaving 24-hour/week timer with
an automatic change between summer-/winter time
according to new european standard (dat 1). A sun or
a snow crystal is indicated in the display, indicating
summer or wintertime respectively. Functioning as
week-timer the days may freely be programmed in
blocks, meaning that days with the same connection
times is programmed in one block and thereby only
occupying one memory space. (Note: When using
Falcon units the DIP-switch on the controller board is set
according to installation guide.)
When used on the water models S4 W, L4 W and L7
W the link between the the connection terminals
28 and 30 on the unit controller board must be
removed.
Night-level temperature 3°C: Switch 3 is set to ON.
Fan speed reduced to low: Switch 4 is set to ON.)
The timer is preset by Flexit to the following times:
07:00 - 17:00 day 1 - 5.
1.1 Connecting the SP405/existing control panel
To connect your existing control panel with the SP405,
follow the description below:
1. SP405 is mounted close to the control panel (check that
the cable goes all the way).
2. The cable with the telephone connection (4-poled) in
both ends is connected between the timer and the exis-
ting control panel. The SP405 has two equal terminals
which both may be used for this purpose.
2
1
