14
EQ 2
min 3 °C
5.
Install the cartridge in the air duct.
4.
Insert the air duct in the wall.
Install the air duct with the sound-absorbing layer
with minimum slope 3° downwards using
polystyrene wedges.
Fill the gaps between the wall and the opening with a
mounting foam.
Make sure that moisture cannot permeate into the
opening in the external wall. Use a suitable sealant.
To enable easy installation of the cartridge in the
air duct cut out a recess in the mounting foam layer
on the side of the cable installation parallel to the
groove in the air duct.
For freedom of placement of the cable in the groove
without any damage to the cable insulating material,
FXWRWKHH[FHVVRIWKHPRXQWLQJIRDP
3RO\VW\UHQHZHGJH
Fill the gaps between the wall
and the opening with a mounting
foam or similar
Summary of Contents for 116001
Page 2: ...2 EQ 2...
Page 23: ...23 EQ 2...
Page 24: ...Flexit AS Televeien 15 N 1870 rje ZZZ H LW QR...
