Assembly
Instructions
STEP 1
STEP 2
STEP 3
STEP 4
Sitting Instructions
Operating Instructions
WARNING!
The red plastic cap must be removed before use.
Failure to remove it will lead to malfunction.
Remove & discard the red plastic cap
covering the tip of the gas spring:
Insert the gas spring (C) into the base (D).
Once aligned correctly, press down firmly.
Attach the Plastic Collar (B) to the
Seat (A) by resting the Seat on the
cushion and firmly pressing the Plastic
Tube against the seat.
Gently slide the seat onto the gas spring.
Once aligned properly, press down firmly
on the seat.
1. To raise the seat, gently press any one of the 3 underseat buttons.
2. To lower the seat: Gently press any one of the 3 underseat buttons and
simultaneously press down on the seat (or sit on the seat).
TIP!
If the seat does not raise easily:
1. Be sure the red plastic cap on top of the gas
spring has been removed.
2. If the stool is assembled correctly, add
additional pressure to the seat by pushing down or
sitting on it to secure the connection for proper
use.
WARNING!
DO NOT LEAN BACK. To reduce fall risk, do not tip Stool past vertical.
WARNING!
Not for use by children.
WARNING!
Do not use with only one foot or no feet on the ground.
1. Stool's base is
unstable. Stool rocks,
tilts, tips and the seat
swivels 360°.
It is not a stationary
chair. Extreme care
must be taken when
sitting on the Stool.
2. Only sit on Stool
when
both of your feet
are planted firmly on the
ground to support
your
entire bodyweight.
Insert
Press
01
02
