01
02
Stud Finder
Cordless Power Drill
Screw Driver
S
afety
Glasses
Note:
To fast the installation, we recommend to use electrical drill for tightening the screws and bolts.
SAFETY
WARNING
This product contains small items that could be a choking hazard if swallowed. Keep these
items away from young children.
● Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, please contact a professional
installer for assistance.
● The ceiling must be capable of supporting the combined weight of the garage storage lift
and your stuff. Otherwise, the structure and weight capacity of the ceiling must be reinforced.
● Proper tools must be used. A minimum of two people are required for this installation.
Failure to install properly can result in property damage or serious injury.
● Check joint parts every two months, making sure the screws have not loosened.
● This product is designed to be installed on a wooden ceiling or solid concrete ceiling.
Before installation, make sure that the weight capacity of the ceiling will support the
combined load of the rack and your stuff. Never exceed the maximum load capacity of the
product 300 lbs(136 kg), or else it may result in product damage or physical injury.
● When choosing a location for your Ceiling Storage Lift, make sure there is enough room to
raise and lower the platform. All obstructions and people should be moved out of the way
when raising or lowering.
Note: This product is intended for indoor use only. Use of this product outdoors could lead to
product damage or physical injury.
!
A
B
C
D
E
F
G
H
I
B1
B2
B3
C1
Flange Bearing x 1
M5 Bolt x 4
M4 Bolt x 1
Cotter Pin x 1
M5 Bolt x 2
M8 Bolt x 4
M8 Bolt x 2
M8 Flange Bearing x 2
3 x 3 mm Hex Key x 1
5 x 5 mm Cross Hex Key x 1
M8 Nut x 8
M8 Flat Washer x 8
St8 Tapping Screw x 6
(
2 Packs)
Metal Expansion Bolt x 6
(
2
Packs)
M8 Flat Washer x 6
(
2
Packs)
M6 J-bolt and Nut x 12
M6 Socket Wrench x 1
M8 Socket Wrench x 1
Wrench x 1
6
1
3
9
2
5
4
7
8
10
1
2
3
4
5
6
7
8
9
10
Hand Crank x 1
Winding Pole x 1
Gearbox x 1
Axle Support x 1
Axle with Wire Rope x 1
Axle Support with Bushing x 1
Connecting Rod x 2
Fixed Plate x 2
Platform Support x 2
Wire Grid x 3
