Page
2
of
5
Entering PARAMETERS
1)
Press the
BRK
key to return to the Main Menu then the
4
or
6
key to place the carrots around the par menu
selection and “Parameters” will appear on the lower line
,
then press either of the
ENTER
keys.
2)
The following screen will appear that offers you the
chance to change from
Channel A
or
Channel B
. Using
the
2
and
8
keys will change the Channel letter. When the
correct channel is displayed, press
ENTER
.
3)
Using the keyboard, enter the
Outside Diameter
of the
pipe. Remember this is the OD of the pipe and a 2 inch
pipe is not 2 inches OD. Press
ENTER
once complete.
4)
Using the keypad, enter the
Wall Thickness
of your pipe
then press
ENTER
once complete.
5)
Using the
2
and
8
keys select the correct
Pipe Material
from the list, then press
ENTER
.
6)
Using the
4
or
6
keys, chose
NO
or
YES
to indicate if your
pipe has internal
Lining
, then press
ENTER
when the
correct selection has been made.
7)
Using the keypad, enter the
Roughness
of the inside of
your pipe. Change the value according to the conditions of
the inner pipe wall and press
ENTER
. The default for a
clean pipe is 0.004”.
8)
Using the
2
and
8
keys select the correct
Medium
from
the list, then press
ENTER
.
9)
Using the keypad, enter the
Medium Temperature
of
the fluid running through your pipe then press
ENTER
.
This will complete the input of all the
PARAMETERS
for your application
All the
PARAMETERS
will be saved in internal memory and you will automatically be return to the
Main Menu
.
>PAR< mea opt sf
Parameters
Parameters
For Channel A:
Outer Diameter
3.500 inch
Wall Thickness
0.216 inch
Pipe Material
Carbon Steel
Lining
>NO< yes
Roughness
0.004 inch
Medium
Water
Medium Temperature
68.0 F
