page 5
Remove the request for a PIN code. So, in the menu of your cell phone, the option
‘request PIN code’ must be switched off.
1. Place the SIM card in the unit (back side)
2. Take the green connector terminal out
3. Switch the unit on with the ON/OFF button on the back side
4. Push the reset button once for about 20 seconds. Then the red LED on the
topside will light up. The red ‘status’ light will (after one minute) start flashing
which means a connection is established and the unit is ready for us.
5. Place the green unit back in the machine.
6. Wait one minute before you start calling.
6. Bellen:
Call the number that belongs to the SIM card you placed in the unit.
When the ‘phone starts ringing’ the green LED on the unit switches of and turns red.
When connection is there you’ll hear: 1x beep. (if you hear 2 beeps you’re too quick;
wait for 5 minutes and try again) or do a full reset. (see ‘reset’ at bottom of the page)
Dial slowly
1234#
: 1x beep (the red monitor LED switches on)
Then
1#
the green “out 1 “ led switches on
Then
1*
the green “out 1” led switches off
Beware: press all digits/symbols slowly and wait about 5 seconds after one
command before issuing a new one.