FLEXi
FLEXi SK232LCD – Brief User Guide
Keyboard overview
Alarm system Arming / Disarming
Alarm system ARM:
Make sure all areas are not damaged.
1.
Press
[ARM]
button.
2.
Enter
[User Code]
.
a.
If the system has only one partition, skip steps
3 and 4.
3.
Press the button of area to be activated.
4.
Confirm your selection by pressing the
[OK]
button.
5.
Exit the premises during the
Exit Delay
timeout.
During the
Exit Delay
countdown, the time for the exit
will be displayed on the keypad, and the text will
appear on the keypad when the arming mode is
activated:
Armed: Area
.
SLEEP mode activation:
(Premises perimeter is secured. Movement inside is
allowed. If you open the entrance door, the alarm will
actuate immediately):
1.
Press
[SLEEP]
button.
2.
Enter
[User Code]
.
a.
If the system has only one partition, skip steps
3 and 4.
3.
Press the button of area to be activated.
4.
Confirm your selection by pressing the
[OK]
button.
5.
The following text will appear on the keyboard
screen:
Sleep: Area
.
Alarm system DISARM:
1.
Press
[OFF]
button.
2.
Enter
[User Code]
.
a.
If the system has only one partition, skip steps
3 and 4.
3.
Press the buttons with the area numbers you want
to control.
4.
Confirm your selection by pressing the
[OK]
button.
a.
When the arming mode is off, the following text
will appear on the keypad display:
Disarmed:
Area
.
STAY mode activation
:
(Premises perimeter is secured. Movement inside is
allowed. Any opening of entrance door enables time
delay during which you have to disarm the alarm):
1.
Press
[STAY]
button.
2.
Enter
[User Code]
.
a.
If the system has only one partition, skip steps
3 and 4.
3.
Press the button of area to be activated.
4.
Confirm your selection by pressing the
[OK]
button.
5.
The following text will appear on the keyboard
screen:
Stay: Area
.
For area status changing into the opposite one it is sufficient to enter User code and select the preferred area.
To delete symbols or command entered, press button
[C]
.
