Connect to the App
Make sure the Leona Smart Home Plug is on standby mode (the blue
indicator light will flash 2 times per seconds) after being plugged in the
socket.
This device is only compatible with routers with 2.4GHz frequencies.
Open the app and tap on “+” to add the device.
Then tap on "Electrical" to select your device.
Select your Wi-Fi network, input your Wi-Fi password, and tap on "Next".
Confirm that the device indicator is rapidly blinking (or reset the device
by holding down the reset button) and tap "Next" to complete the
process.
Tap on “AP Mode” and tap on “Confirm indicator rapidly blink” (if not,
please reset the device).
Select your Wi-Fi network, input your Wi-Fi password, and then tap on
“now” to go to WLAN settings in your smartphone. Select the Smart Life
network for your WiFi. Input your password after you select it.
Go back to the app and the app will start connecting.
3
2
1
If you want to add a new device under AP mode, please follow steps from
1 to 4 above and then:
03
4
3
5
6
2
1
