17
1. Remove tension. Use a Flexco® Belt Lifter or other appropriate lifting equipment to lift the belt off the impact bed.
Compress impact energy absorbers with C-clamp (Fig. 1).
6.4 Impact Bar Replacement Instructions
Tools Needed:
- (2) 15/16" (24 mm) wrenches or crescent wrenches
- Broom, wire brush and/or putty knife (for cleaning bed and structure)
- Come-along
- (4) C-clamps
Impact Bar and Fastener Detail
Section 6 - Maintenance
Physically lock out and tag the conveyor at the power source
before you begin cleaner installation.
2. Remove stationary bars. Remove bolts at bases of stationary arms and lift assembly out of the way (Fig. 2).
DRX™ 3000 Dynamic Impact Bed
Flat washers, lock washers
and Nylock nuts
Slider Bars
Impact Bars
Fig. 2
Bolts
Fig. 1
C-clamp
BELT DIRECTION
Stationary Arms
Slider Bars
Impact Bars
